Your Family Will Be Thankful For Having This Replacing Upvc Window Handles

Replacing uPVC Window Handles

Switching the handles of windows made of upvc is an easy job. The most important thing is to ensure that the new handle is a good fit for the spindle cut out in the window mechanism.

If the steps listed below are followed the cockspur handle will be able to fit into most windows. The most important factor is the step in the height of the handle.

What to Look For

As time passes, uPVC handles on many windows in the UK may begin to show signs wear and tear. The window handle may become shaky or difficult to operate when this occurs. This is a easy task that can be accomplished by anyone who is familiar with basic hand tools.

The first step is to ensure that the handle is firmly fixed to the window frame, and is in the open position. The next step is to locate the fixing pins or screws that keep the handle in the position it is in.  upvc door handles  are typically located on the inside of the handle. They can be removed with an screwdriver or pliers.

When the handle is loose, gently pull it away from its hinges. Then, you will need to locate a replacement handle in the same dimensions and style. This can be done on the internet or in a local DIY store, and should take around five minutes using a screwdriver.

One crucial aspect to take into consideration when replacing the uPVC window handle is its step height. This is the distance between the handle's base and where it is located in the window frame. This is a typical measurement and you should confirm the step height before ordering a replacement handle.

Depending on the kind of handle you choose there are various sizes available. Inline handles for uPVC windows generally have lug centres of 31mm There are also varieties of cockspur handles that have 43mm centres. Tilt and turn handles are often found on windows made of uPVC and they feature a specific design that allows windows to be tilted in for ventilation and turned to open the window completely.

The most common cause of breakage in uPVC handles is that they crack internally rather than breaking off from the base section. This makes them difficult to open and therefore it is important to make sure that any replacement handle you purchase has the same length of spindle that your current one.

Remove the Old Handle

A poorly installed or damaged window handles may cause your double glazed windows to close or open incorrectly, and can cause them to become stuck. There are a myriad of reasons, such as general wear and tear, or corrosion of the handle. In these situations it is essential to find replacement window handles made of upvc as soon as you can in order to prevent further damage and loss of function.

One of the first steps to do when replacing upvc window handles is to remove the old handle from the window. Start by removing the screw with the handle when it is in a closed position. This will reveal a screw and once removed, you can begin to remove the handle. It is a good idea to employ an electric screwdriver to accomplish this as it will make the task easier and quicker.

It is also important to note that the screws on the handle could be hidden behind caps made of plastic, so it is recommended to use an Stanley knife to the screw caps and then take them off. Once the old handle is removed, you must look at the square cut on the base of the handle to make sure that the new window lock handles are compatible with it. This is important as you'll need to measure the length of the spindle of the old handle to make sure it is in line with the size of the window mechanism and handle spindle cut out.

The different types of upvc window handles are: Espag handles, which feature a central screw that can turn left or right; Cranked handles with two screws, and are found on tilt and turn upvc windows and Spade handles with an arm with a flat surface and can be put on either side of the window. It is simple to replace the handle once you have located one that is suitable. Just screw it into place, and make sure the spindle is properly inserted in the lock mechanism. Once you have done this then tighten the handle to the window frame. The replacement upvc handle will now be secure.

Take a measurement of the Spindle

If you're replacing a upvc window handle that has slipped off, it's because the spindle holding it in place has become damaged or loose. In some cases this can be fixed using a screw or pin to secure it. In some instances it might be necessary to replace the handle. There are several kinds of window handles made from upvc. They include espagnolette handles that are inline as well as cockspur handles. tilt and turn handles. Each type of handle is installed and replaced in a different fashion.

It is crucial to measure the current handle before buying an alternative. This will ensure that the handle will fit the window properly and be the correct size. All handles are calibrated in accordance with industry standards, making it easy to identify the correct size.

To determine the size of the handle you must turn the window to the open position. Then, you should be able see the size of the screw or pin that holds it. Use a ruler or a tape measure to determine how long the spindle is. Once you have determined the length of the spindle, you can purchase a new spindle that is the same length.

The step height of a window handle is also important to take into consideration when purchasing a replacement. The step height is measured from the base to the point where the handle is placed on the frame. This is usually around 21mm or 9mm in aluminum and uPVC. Dropping something in the gap will allow you to determine how far the handle extends before it meets an obstruction.

Cockspur handles can have different backsets depending on what kind of window you want to install them in. Inline Espag handles come with an average height of 43mm from centre to centre (2 fixing points). Cockspur handles however, have different backset heights dependent on the design of the window they are in. This is because they have an extension spur that extends from the handle and then locks over the cockspur wedge striker plate.

Install the new handle

When you've chosen a new handle, carefully align it with the screw holes on the door and secure it with the screws supplied. Install the latch lever in the same way as the handle on the main handle when you're replacing the door handle. Then, you can attach the door trim once more to hide the mounting screws.

Tips: To remove a metal head from a wooden wedge place the handle on the floor, so that its wide end is level with the ground. Then, you can use a hammer and tap the narrow end. Be careful not to damage the handle or the spindle.